Physical properties of
Tensile strength σ B (MPa)≥515-1035
Conditional yield strength σ0.2 (MPa)≥205
Elongation δ5 (%)≥40
Reduction of sectionψ (%)≥?
Hardness: 201 HBW or less; 92 HRB or less; 210 hv or less
Density (20℃, g/cm³):7.93
Melting point (℃) : 1398 ~ 1454
Specific heat capacity (0~100℃, KJ·kgK):0.50
Thermal conductivity (W/ (m·K)):(100℃)16.3, (500℃)21.5
Linear expansion coefficient (10·K):(0~100℃)17.2, (0~500℃)18.4
Resistivity (20℃, 10 ω ·m/m):0.73
Longitudinal elastic modulus (20℃, KN/mm):193
1、ASTM A276(Standard Specification for Stainless Steel Bars and Shapes)
304 | C | Mn | P | S | Si | Cr | Ni |
requirements,% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-11.0 |
2、ASTM A240(Chromium and Chromium-Nickel Stainless Steel Plate,Sheet, and Strip for Pressure essels and for General Applications)
304 | C | Mn | P | S | Si | Cr | Ni | N |
requirements,% | ≤0.07 | ≤2.00 | ≤0.045 | ≤0.030 | ≤0.75 | 17.5–19.5 | 8.0–10.5 | ≤0.10 |
3、JIS G4305(cold-rolled stainless steel plate, sheet and strip)
SUS 304 | C | Mn | P | S | Si | Cr | Ni |
requirements,% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-10.5 |
4、JIS G4303 (Stainless steel bars)
SUS 304 | C | Mn | P | S | Si | Cr | Ni |
requirements,% | ≤0.08 | ≤2.00 | ≤0.045 | ≤0.030 | ≤1.00 | 18.0–20.0 | 8.0-10.5 |
|
|
|
|
|
|
|
|
|
|
|
Serialnumber | Standard/S30400 | C | Mn | P | S | Si | Cr | Ni | N | Cu |
1 | ASTM A276/A276M-15 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
2 | ASTM A959-11 | 0.07 | 2.00 | 0.045 | 0.030 | 1.00 | 17.5-19.5 | 8.0-11.0 |
|
|
3 | ASTM A240/A240M-15a | 0.07 | 2.00 | 0.045 | 0.030 | 0.75 | 17.5-19.5 | 8.0-10.5 |
|
|
4 | ASTM A182/A182M-15 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 | 0.10 |
|
5 | ASTM A193/A193M-15 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
6 | ASTM A269/A269M-15 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
7 | ASTM A312/A312M-15a | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
8 | ASTM A320/A320M-15a | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
9 | ASTM A403/A403M-15 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
10 | ASTM A493-09(2013) | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-10.5 | 0.10 | 1.00 |
11 | ASTM A554-15a (MT-304) | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
12 | JIS G4303:2012 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-10.5 |
|
|
13 | JIS G4304:2012 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-10.5 |
|
|
14 | JIS G4305:2012 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-10.5 |
|
|
15 | GB/T 20878-2007 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
|
|
Product Testing
Product Packaging